top of page

LABORATORY GAS PIPE LINE 

Medical Gas Installations, Laboratory Gas Installations, Industrial Installations
Gas installations should be selected from the material suitable for the relevant gas type and it should be ensured to reach the point of use safely.
Considering that there are possible design errors during the implementation of the projects that are not designed by Polartek, the factors such as gas-material compatibility, pressure resistance, flow rate, capacity are reviewed during the application and technical documents are created by examining in detail. Accordingly, approved, certified gas installation materials to be used in laboratories are selected, and the rules of installation and commissioning are made by appropriate methods.
Mechanical installations installed by our company.

  • Medical Copper Pipe Installation

  • Stainless Pipe Installation

  • Ferrule Jointing Methods

  • Orbital Welding Method

Medical Copper Pipe Installation

Orbital Welding Method

bakir-boru-tesisatı
orbital-kaynak-paslanmaz

Stainless Pipe Installation

yuksuklu-paslanmaz-boru-tesisatı

Ferrule Jointing Methods

kaynakli-paslanmaz-boru-tesisatı

AUTOMATIC PRESSURE CONTROL PANEL

The task of the central pressure control panels is to adjust the pressure of the gas supplied from the high pressure tubes to the pressure of the main distribution line and to supply the main distribution line uninterruptedly. Available in automatic and manual versions.

The purity level of the gas to be used in the selection of the pressure control panel is important for special applications such as laboratory devices. For this reason, equipment suitable for 99.9999% gas use, which is defined as high purity gas, should be selected. These equipment are specially subjected to Helium testing.

The function of the autochange unit is to automatically feed the line from the other side and ensure uninterrupted gas flow when the pressure of the tubes on one side drops below the line supply pressure.

SEMI AUTOMATIC

basinc-kontrol-paneli

FULL AUTOMATIC

tam-otomatik-basinc-kontrol-paneli
Tam-otomatik-gaz-valfi

USE POINT REGULATORS

The point of use pressure control panels will ensure the regulation of the main distribution line pressure to the point of use pressure.

Since there may be more than one device connected to the same line in the laboratories and the operating pressure of the devices will be different, a separate regulator is recommended for each device. Thus, gas flow and pressure can be provided to the devices independently of each other, they can be opened and closed, and the device should be taken into service, etc. it is more secure. For ease of use, appropriate equipment must be selected for the location.

1901_L%20Postaba%C5%9F%C4%B1%20(2)-500x5
duvara-monte-regulator-grubu
Kullanım-Noktası Regülatörü

GAS DETECTOR SYSTEM 

At the gas supply and usage points, it may arise from installation, equipment, or user errors, and will not pose any risk of flammable-explosive, combustible, asphyxiating and toxic gas leaks.
In areas such as laboratories, chemical material stores, tube rooms, welding workshops, absolute necessity should be considered as a safety system.

Gas Detection System Flow Chart

Gaz-tesisatı-dedektör-şeması

Gas Detector - Control Box

Gaz dedektörü kontrol panosu

Wall mounted
Direct connection up to 4 or 8 detectors.
Connection up to 32 detectors with additional module.
Programmable measuring range
Double relay output
Possibility to connect Siren + Solenoid Valve

Gas Detector - Wall Mounted

gaz-algilama-dedektoru

Suitable for use with fixed assembly
Measuring explosive gases 100% LEL, Oxygen 0-30% Vol, toxic gases in ppm
4-20 mA output
Operating temperature between 20 and +60 C
IP66, ATEX certified
Steel body

bottom of page